User`s manual

ETZ Series H.264
ETZ _v5.5.0.0 r050810
42
¾ Link to Recording: Specify which cameras to start recording when no signal is detected.
¾ Link to Output: Specify the output devices to trigger when no signal is detected.
¾ Link to Alert: Specify the alert to link with when no signal is detected.
¾ Apply All: Apply the setting for all cameras.
3.3 No Signal
Specify which cameras to record and which devices to trigger when there is no signal from camera.
3.4 Watchdog
Setup alert and output type when DVR shows the following errors:
1) Video Capture Error 2) Audio Capture Error 3) Recording Error 4) Disk Writing Error
¾Set watchdog to Reboot or send
Message when error occurs.