User`s manual

ETZ Series H.264
ETZ _v5.5.0.0 r050810
37
2.3 Input
Note: Input devices are devices such
as motion detectors, door sensors, etc.
Number of Input channels will depend on the ETZ DVR model. Click on the box to enable the
output device.
¾ Name: Define name of each sensor input.
¾ Apply All: Apply same setup value to all input devices.
¾ Choose type of input: NC: Normal Close / NO: Normal Open
¾ Setup each input device by name and signal type: Normally Open ( NO) / Normally Closed (NC)