User`s manual

ETZ Series H.264
ETZ _v5.5.0.0 r050810
32
Set Frame
1. Press the “Set Frame” button to create an original
frame.
2. Once the frame has been set, input the detection
rate at which to periodically check for object movement.
3. Set the object detection zone in the frame where
you would like to track object movement.
4. Use the “View Original Frame” button to compare
the original frame with current frame.
An original frame needs to be set to compare it with future frames for comparison. To do this,
setup a frame in the camera to be your original.
2.1.3 People Count
The people count feature gives you the capability to determine the number of people crossing
a specified zone.
How to setup:
1. Check mark “People Count” and click the “People Count” button.
Note: Object detect will track changes accordingly,
depending on the detection time interval specified.
2. People Counting Method setup box will open. Click to choose Motion Detection or Input device
method used to capture. Set Interval and option to reset daily.