User`s manual

ETZ Series H.264
ETZ _v5.5.0.0 r050810
29
Device
Setup parameters for Camera, Alarm, Sensor, Audio, and Alert.
 Name: Manually enable the cameras by checking the appropriate boxes.
 Resolution: Select recording resolution
D1: 704 x 480 Half D1: 704 x 240 CIF: 352 x 240
 Event Recording Frame: Adjust the recording frame for event driven recording mode.
 Recording Frame: Adjust frame rate for time lapse recording mode.
 Default: Revert back to default settings.
 Video Signal Type: Choose between NTSC / PAL signal input.
 Auto Channel Scan: Automatically scan for cameras connected to the DVR.
 Activate the camera: Check mark to activate all cameras.
 Modify Frame rate by itself: Check mark box to allow software to auto adjust frame rate based
on number of cameras activated.
2.1 Camera ( Number of channels will depend on model – up to 32 channels)
Note: Pressing Channel Auto Scan will enable cameras connected to the DVR automatically.