User`s manual

ETZ Series H.264
ETZ _v5.5.0.0 r050810
26
 Clear: Default map.
 Delete: Delete map.
 Open Map Image: Open a BMP or JPEG file.
Through the electronic map, you can check the location and the condition of each device. Use an
image file of your facility to map your devices using the provided camera, alarm and sensor icons.
¾ Open an image of your location by pressing Open Map Image.
¾ Once the image loads, use the designated buttons to define camera, input, and output locations.
Camera
Input
Output
Note: Buttons will be designated on the left side of image and can
be moved around on the image.
¾ Move the buttons around to areas of the map where the device is located.
¾ You can view the map from the main control window by pressing the E-map button at the bottom
of the window.
¾ Camera buttons will stay White when not recording and Orange when recording.
¾ Input / Output buttons will stay White when there is no activity and Orange when
triggered.
1.6 E-map / TV-OUT
E-map
Orange Icons: Activity triggered / recording active.
White Icons: No recording / no activity.
Note: The images are not pre-made. User will need to fabricate his or her own image.