Operation Instructions

Door and Window Sensor Operation Instructions
2
1.2 Battery Installation
To install the battery slide the sensor assembly from its base.
Insert the CR2032 coin cell battery into the sensor assembly.
Slide the sensor assembly back on to its base.
1.3 Installation
The Sensor is affixed to the opening side of the door or window and the magnet is affixed to the
door/window frame such that the two components are less than 1/2” (12mm) apart.
Remove the 3M tape backing from the sensor and affix to the door/window
Remove the 3M tape backing from the magnet and affix to the door/window frame such that
the gap between the sensor and the magnet is no more than 1/2”.
1.4 Test the Operation
Test the sensor operation:
Close the door/window
The blue indicator light will flash indicating a change in status.
Status
Description
Closed
Magnet is less than ½” or
12mm to the sensor