User's Manual

FAQ:
If unable to connect the Bluetooth Mouse to the computer, or the Mouse work unconventionally,
please try the steps below:
1. Before you install your Bluetooth Mouse, please make sure you have done the Bluetooth Dongle
installation procedure, and the Bluetooth facility is turned on.
2. Press and release the “connect” button on the bottom of Bluetooth Mouse. The red light led on
the bottom will be on(changes among High-light, Low-light and Off, ready for the match).
3. Make sure that the Computer is connected to the Bluetooth Mouse. If they are matched to each
other before, then under the Standby State, just double click the left button of the mouse. If the
Match Button is turned on, please rematch the mouse to computer. If unable to rematch, kindly
delete the Mouse Icon to erase the stored info of the mouse in the computer.
4. Make sure that the mouse is within the effective range---10M.
5. Make sure that there’s no change of the Bluetooth facility. If anything changed, please kindly
rematch.
6. If your Bluetooth facility is connected to other Bluetooth products, please kindly confirm that the
speed of the Bluetooth facility is enough.
7. Please kindly check the batteries. If they are short of power, replace them for new ones.
Main Performance
Mouse size ：94mm×56mm×36mm
Weight：56±5g
Materials of Mouse：upper ABS
Scrolling wheel: PC+ silicon
Operation Voltage: 3V DC
Operation Current: <30mA, operate on a white paper.
Sleep Current: 10uA
Transmit Range: up to 10 meters
Work Temperature: -0~+45 degree
Storage Temperature: -10~+85 degree
Humidity: 20%-50%
Federal Communication Commission Interference Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.