User's Manual

Chargeable Wired &Wireless Optical Mouse User Manual
Welcome
Thank you for selecting this product! This mouse is one kind of newly developed wireless RF mice in our company, and it connect with wired &wireless
mouse function. The comfortable and perfect shape is designed according to somatology. With it, You can get rid of the bondage of wires and enjoy your
beautiful life from the high technology
Product Features
1. it uses the global-used frequency of 27MHz.Radio frequency 27MHz,It has 256 ID code, there is no interference even many mice being used at
the same time.
2. As a wired mouse use enjoying the wired mouse precision and stability.
3. With receiver hidden inside and the whole design looks more ntimate and scientific.
4. Automatically save power sleeping functions, battery life be prolonged.
5. With charge and regular circuit, it can use the attached retraceable line to charge for the mouse. Even if there is no battery in the mouse, you can use
the mouse directly, thus it resolve the problem of lack the battery.
Systems Compatibility
IBM PC and Windows Me/2000/XP
Build-in mini receiver
As bellow, press the receiver-out button, and the receiver can spring out automatically, at this time, mouse begin to work. If you push the receiver back to
the transmitter, power will be cut down automatically.
The Steps of Install Battery
1, Please prepare for two PCS new AAA alkaline batteries
2, Press the button of the mouse upper cover and pull the battery cover rearward (Please see the reference picture)
3, Please insert the batteries correctly according to the polarity marks of the battery grooves.
4, Pull the battery covers forward, when you hear “crack” sound which shows the battery cover is locked successfully.。
Receiver Installation
1, please use extended cable, and put the receiver and transmitter on one desktop, in this way, you may have higher working efficiency.
2, If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the connector before your computer start-up.
3, For laptop, you may connect the receiver directly with the USB connector.
ID Setup as wireless mouse
1, Please move the mouse near to the receiver
2, Press the ID button of the mouse bottom with some hard and
accurate object within 10 seconds, the receiver light will flash very fast, a few seconds later it will be on which shows it is successfully
to finish the digital transmission between the mouse and the
Push battery
cover
receiver. You may start to use it.
3. Working distance: within 0.6-1.5 m
ID connect
ID Setup as wired mouse
In some occation, such as airport, hospital etc which can’t use the wireless mouse or the batteries are not enough. You can use the wired mouse .you can