User's Manual

Receiver Installation
1. We propose you to use extension cord, and put the receiver on your working desktop, in this way, you may obtain higher working
efficiency.
2. If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the port before your computer start-up.
3.For laptop, you may connect the receiver directly with the USB port.
ID Setup as Wireless mouse
1.Please move the mouse close to the receiver
2.Press ID button of receiver with hard and acuate object, and in the meantime within 10 seconds, press the ID button of the
mouse bottom about 1 second with hard and acuate object, the receiver light will flash very fast, a few seconds later it will be on
which shows it is successfully to finish the digital transmission between the mouse and the receiver. You may start to use it.
3.Working distance: within 0.6-1.5 m
Use as Wired Mouse