User's Manual

way the battery life can be prolonged. The charge time is approx. 10 hours.
This charger has auto-stop charging function and it refuses to charge the batteries which power is
higher than the original design value or the battery still can be used.
Attention Please
1. Please don’t make the mouse far away from the receiver in order to work more smoothly.
2. You’d better use the mouse on the white desk, in this way the batteries can be used longer
time. Please remove the batteries if the mouse will not be used for a long time.
3. This mouse with save power sleeping functions, please press any key or scroll the wheel to
wake up the mouse when it is sleeping.
4. If you want to take off the mouse power, please continue to press the ID switch of the
mouse bottom over 3 seconds. If you want to take on the power, please click the ID switch
once again.
5. The optical mouse will not work freely on a smooth desk ,glass, any reflecting surface, 3D
mouse pad.
6. No need to check the digital connection within 10 seconds when change the batteries, if
more than that please according to the above way to re-operate.
Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note
FCC Statement:: 1.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause harmful interference,
and(2)This device must accept any interference received, including interference that may
cause undesired operation. 2.Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment. These
limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
--Consult the dealer or an experienced radio/TV technician for help.