User's Manual

RF Wireless Optical Mouse

User Manual

Welcome

Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed RF

wireless technology 27MHz that replaces the traditional wired mouse. You can use your wireless

optical mouse freely and improve your efficiency and enjoy your beautiful life from the high

technology.，it added the re-chargeable function , it make you easy and comfortable.

Product Features

1. Radio frequency 27MHz, enjoy your freely wireless space

2. It has 256 ID code, there is no interference even many mice being used at the same time.

3. Automatically save power sleeping functions, battery life be prolonged.

Systems Compatibility

IBM PC and Win98/Me/2000/XP

No need driv

USE Mouse

1. Please prepare for two PCS new AA recharge batteries

2. Press td pull the battery cover

3. Please insert the batteries correctly according to the polarity marks of the battery

grooves.

4. Pull the battery covers forward, when you hear ”crack” sound which shows the battery

cover is locked successfully.。

5. If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the

connector before your computer start-up.

6. For laptop, you may connect the receiver directly with the USB connector.

7, If you use desk PC, there is a little far between the case and your working surface, suggest

you use an extended USB cable to connect your case and the receiver, so you can place the

receiver on your working surface conveniently.

ID Setup

1. if the ID of RF mouse have been lost ,Please move the mouse near to the receiver

2. Press the ID button of the receiver by your hand, the receiver light begin to flash

3. Press the ID button of the mouse bottom with some hard and accurate object within 10

seconds, the receiver light will flash very fast, a few seconds later it will be on which

shows it is successfully to finish the digital transmission between the mouse and the

receiver. You may start to use it.

4. Working distance: within 1-2 meters.

Charge the chargeable batteries

1. Please open the cover of the 2 in 1 receiver.

2. Please put 2 PCS chargeable batteries into the charger and pay attention to the polarity.

3. The indication CHG is red while charging and Led will become green if finishing charge.

There is no any indication if batteries in wrong place or broken.

4. This charger uses USB or PS/2 5V power and uses slow charge means because in this

PAGE 1
RF Wireless Optical Mouse User Manual Welcome Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed RF wireless technology 27MHz that replaces the traditional wired mouse. You can use your wireless optical mouse freely and improve your efficiency and enjoy your beautiful life from the high technology.，it added the re-chargeable function , it make you easy and comfortable. Product Features 1. Radio frequency 27MHz, enjoy your freely wireless space 2.
PAGE 2
way the battery life can be prolonged. The charge time is approx. 10 hours. This charger has auto-stop charging function and it refuses to charge the batteries which power is higher than the original design value or the battery still can be used. Attention Please 1. Please don’t make the mouse far away from the receiver in order to work more smoothly. 2. You’d better use the mouse on the white desk, in this way the batteries can be used longer time.