User's Manual

4. The Bluetooth device will connecting and the match completely.
The Mouse functions
1.CPI adjustable function
With 5 adjustable CPI 800/1200/1600/2000/2400, factory setting is 1200CPI. Press
the switch button on top of Mouse can easy to adjust CPI. LED indicator will flash
one time while it converting to 800CPI, LED will flash twice while it converting
to 1200CPI, LED will flash three times while it converting to 1600CPI, LED will
flash four times while it converting to 2000CPI, LED will flash five times while
it converting to 2400CPI
2. Low power indication
LED will flash in red when battery is getting out of power, remind that it need to
change the new battery
3. Saving power mode and power switch off
If mouse is stay out of work for 10 minutes, it will turn to power saving mode, press
any button to restart it. You can switch off the mouse to save power.
4. Reconnection
If you press the connect button on mouse bottom by accident, Bluetooth will
reconnection. It will be automatically reconnect after 10 minutes, or turn off power
and turn it on again, Bluetooth will connect immediately.
If the Bluetooth connect was cut improperly, please reconnect it.
If it is failed to reconnect, please delete the Bluetooth device and install
it again, or cut the connection in the menu, reconnect it by software as the
following picture,