User's Manual

Instruction for use:
1. CPI Switch function
The CPI key is for speed conversion： 800-1200-1600. When first
connected, the default is 800CPI. After each switch, the mouse can
remember the final CPI choice. During conversion, LED light flashes one
time, it means 800CPI , LED light flashes twice, it means 1200CPI, LED
light flashes three times, it means 1600CPI
2: Low battery reminder function
The power gets lower during use. Please recharge the battery in time
once the LED shines red light
3: Auto saving function
The mouse will be sleeping if the mouse out of use after 10
minutes.Movement can awake the mouse. After connection, the mouse
will be in the power saving state if unplug the adaptor or shut the
computer down. Press any button to reuse. Please turn the mouse off
during outing
4.USB rechargeable function with patent
Pls recharge the battery in time once the indicator remind of low
power.Use the USB line attached in the packing. One end is connected
into the computer’s USB port, the other end is connected to the mouse’s
mini USB port , the recharge will begin automatically.The recharge time
is 6-8 hours and recharge times is 500.The mouse can be use while
recharging
Caution: Pls do not recharge for irrechargeable battery
The first recharge should be 16 hours to activate the battery fully
5. The forth and fifth keys can be defined
The defualt function of the forth and fifth keys are [Forward] and
[Back].If special driver are installed, there are more than dozens of
functions can be defined in the optical disk (If optical disk equipped)
or the driver can be download by the specific website.
6. If press the conncet button carelessly during use. Bluetooth will be
the reconnection state. Connection will be ok after 10 minutes or turn
off then turn on the power switch
If any unnormal interruption, Pls reconnect. If reconnect unworks ,
Remove or disable mouse connection in “Bluetooth Devices”,and
reconnect by the above steps
Picture below is the device management window of “Bluetooth
Devices” driver attached by “Windows” Choose the mouse icon and
click the “Remove” the Bluetooth is omitted successfully