User's Manual

4, the receiver collection function
The mouse uses ultra-miniature (Nano) receivers, usually placed in long-term or Notebook PC's USB port, the
computer did not have any effect. If you want to bring the mouse to go out alone or collection, you can put the
receiver inside the mouse, easy to save, easy to carry out in order to avoid missing
5, can be customized to the fourth, the fifth key function
The fourth side of the mouse, the fifth key function, the default is backward / forward two functions, if equipped
with a particular driver will be able to customize dozens of functions.
Driver equipped with CD-ROM (if equipped with a CD-ROM, ) or downloaded to the specified site. Upon
installation, you can choose from dozens of customizable features
Reconnect:
Wireless mouse transmitter and receiver, respectively, a group identification code built-in, easy to use one
more group of mice used. High temperature, high magnetic fields and vibration may cause the disappearance
of this set of code, you need to reconnect before using.
1, disconnect and reconnect the receiver
2, click the mouse at the bottom of the code switch
3, the code is successful, the wireless mouse can be used again.
Attention:
The mouse as a mouse using infrared motion detection, compliance with safety regulations,
The mouse uses 2.4GHZ radio waves to transmit data, using a distance of 10 meters line of sight, if there is a
large obstacle, the distance will be reduced by use of environmental disturbance
In the rugged, reflective and other desktop may affect the use of the mouse
Warning
Without the explicit approval of the responsible authority of any change or amendment right to ban a user to
operate this equipment.
Remark
This equipment has been tested and found to comply Class B digital device, the limitation complies with
FCC Part 15 regulations. This limitation requires the residence to provide reasonable protection against such
interference at. This device uses radio waves emitted when, if not refer to installation instructions, it may cause
harmful interference to radio communications. However, no guarantee that interference will not occur in a
particular device. If this equipment does affect radio or television reception, you can switch off the device and
then turn to adjust. The user is encouraged through one or more of the following methods to correct the
Interference:
* Move the receiving antenna;
* Increase the equipment and receiver distance;
* This device is connected to the receiver circuit different;
* Consult the dealer or seek an experienced radio / TV technician for help.