User's Manual

DS-2293 2.4G Optical Manual

(A3000+ MA4302)

Features:

2.4G work frequency, high universality, up to 10 Meters

Avago high-end mainstream optical chip, low power consumption, stable

cursor and stronger to pass the surfaces

Three CPI switch: 1000-1500-2000 with switch indicator

Infrared as mobile tracing light source

Multistage power saving function, support power off completely

Low power indicator

Mini Receiver (Nano), Plug and play

How to use

1. Get the mouse and receiver out of the package

2. Insert the receiver into computer’s USB port

3. Insert 1pc alkaline dry battery into the mouse

4. Switch the power button to “ON’ on the bottom of device the LED light

will blink a few seconds, now the device can be used

Advanced Functions:

1: CPI adjustable function

Three CPI for conversion: 1000/1500/2000. Default is 1000CPI. Press the

CPI button to switch the speed. During switch progress, LED light

flashes one time, it means 1000CPI , LED light flashes twice, it means

1500CPI, LED light flashes three times, it means 2000CPI

2: Low battery reminder function

The power gets lower during use. Please insert new battery once the LED

shines red light after low voltage

Attention: Only AAA Alkaline dry cell

3: Auto saving function

The mouse will be sleeping if it out of use after 8 minutes. Press any

button to reuse. Please turn the mouse off during outing

Warning: Do take the battery out if disuse long time

PAGE 1
DS-2293 2.4G Optical Manual (A3000+ MA4302) Features: 2.4G work frequency, high universality, up to 10 Meters Avago high-end mainstream optical chip, low power consumption, stable cursor and stronger to pass the surfaces Three CPI switch: 1000-1500-2000 with switch indicator Infrared as mobile tracing light source Multistage power saving function, support power off completely Low power indicator Mini Receiver (Nano), Plug and play How to use 1. Get the mouse and receiver out of the package 2.
PAGE 2
4: Built in Nano receiver: No influence for Nano receiver to be inserted into the USB port for a long time. It is convenient to put the Nano receiver inside the mouse. Reconnection There is one identification code of the mouse.
PAGE 3
measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.