Audio User Guide MODEL#: W100-41 SAVE THESE INSTRUCTIONS THIS PRODUCTWAS MANUFACTURED BY EASTECH FOR ASHLEY FURNITURE INDUSTRIES, INC. All Rights Reserved.
Table of Contents Table of Contents .....................................................................................2 1 2 3 4 5 6 7 8 Components List ................................................................................3 Notice .................................................................................................4 2.1 Notice of Compliance.......................................................................................4 2.2 Trademark.......................................
1 Components List The product package should include the following items, contact with your dealers if any component is missing or damaged: Figure MODEL#: W100-41 Descrip on Quan ty Main Unit 1PC Power Adapter 1PC Power Cord 1PC Remote Control 1PC AAA Ba ery 1PC User Guide 1PC Warranty Card 1PC Page 3 of 17
2 Notice This section contains the legal and trademark notices. 2.1 Notice of Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: a this device may not cause harmful interference, and b this device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
•• •• •• •• •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
Class II equipment symbol This symbol indicates that the unit has a double insulation system. ~ AC voltage This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
4 Your product Congratulations on your purchase. 4.1 Main unit 4.1.1 Top panel of main unit a Standby indicator Standby indicator turn on red when unit is standby mode. b Display panel 4.1.2 Back connectors of main unit Connect other devices to your product. a DC IN Connect to AC power supply. b AUX IN Connect to an analog audio output on TV or an analog device. c AUDIO IN Connect to TV or a MP3 player. d OPTICAL IN Connect to an optical audio output on TV or a digital device.
4.2 Remote Control a (Standby-On) Turn main unit on or off. b USB Switch to USB mode. c (Play/Pause) Start, pause or resume play. d (Previous/Next) Skip to the previous or next track. e BASS Increase or decrease bass. f SOURCE Select an input source for the product. g DIM Select brightness of the display panel for this product. h SOUND Select a sound mode. i NIGHT Turn night mode on or off. j (MUTE) Mute or restore volume. k (Bluetooth) Select to Bluetooth mode.
4.2.1 Replace battery a Open the battery compartment. b Insert batteries, with the polarity (+/-) as indicated. c Close the battery compartment. Warning •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. •• The product/remote control may or may not contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! •• The battery contains perchlorate material, handle it with care.
5.2 Connections 5.2.1 Connect To TV Note •• Make sure the unit is Turned Off when connecting. •• Check whether the connection for all cables are connected tightly. •• If you connect with a Audio in cable, make sure the volume for the headphone output is appropriate for the product input. •• If the Audio in volume is too soft, the product may not output sounds with appropriate volume. 5.2.2 Connect AC plug into AC outlet. 5.2.3 Turn on the product. Please refer to “Play audio through Bluetooth” on 6.
5.2.4 Press repeatedly SOURCE on the remote control to select the audio output of the connected device. 5.3 Connect audio from other device Play audio other devices through your product. Note •• During play, do not plug out the audio cable. Connect audio through a digital optical cable (Not supplied). Connect audio through analog audio cables (Not supplied).
6 Use your product This section guides you to play audio from connected devices. Before you start • Make necessary connections described in this User Manual at previous section, connect and set up. • Use remote control to select correct signal source for audio. 6.1 Adjust the volume 1 Press VOL +/- to increase or decrease a volume level. • To mute sound, press on remote control. • To restore the sound, press again or press VOL +/-. 6.
What you need • A Bluetooth device which supports version as 4.1 + EDR. 1 2 3 4 5 Press on the remote control to switch the product to Bluetooth mode. »» BT is displayed on the display panel, blinking. On the Bluetooth device, switch on Bluetooth, search for and select W100-41 (see the User Manual of the Bluetooth device on how to enable Bluetooth). »» During connection, BT on the display panel blinks. Wait until you hear a beep sound from this product.
• During USB play, Press and hold repeat mode. to select one repeat, all repeat, shuffle or off Note •• This product may not be compatible with certain types of USB storage device. •• Digital camera PTP and MTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3) are not supported. •• Support a USB port: 5V , 1A. 6.
7 Product specifications Specifications and design are subject to change without notice. Specifications Amplifier RMS Total output power: 70 W RMS (+/- 0.5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 850mV • AUDIO IN: 400mV Bluetooth • Bluetooth profiles: A2DP, AVRCP • Bluetooth version: 4.1 + EDR USB • Compatibility: Hi-Speed USB (2.
8 Troubleshooting To keep the warranty valid, never try to repair the product yourself. Malfunctions may occur with any electrical equipment. This must not always involve a defect of the device. Therefore, check the following table to see if you can eliminate the problem yourself. Malfunction Possible cause/ Elimination The product does not work. • Disconnect the product from the power supply for a few minutes, then reconnect. No sound from the product speakers.
