Specifications

EASTAR UHP-1000 SERIES SATELLITE ROUTER
INSTALLATION AND OPERATION MANUAL, V. 2.3
(SW VERSION 2.2.9)
© ROMANTIS 2010 9 www.romantis.com
Table 1 UHP-1000 Satellite Router Specificiations
PARAMETER
SPECIFICATION
IP-address support on the device
Up to 1000
Efficiency
96 Mbps (limited by LAN) or 28,000 pps
Up to 1000 routes in the Table without losses in routing
efficiency
Support
IP Multicast / DSCP / VLAN (+port tagging) / CRTP / L2 Bridge
Prioritization levels
3, adaptive
Control and monitoring
WWW, Telnet, SNMP-V2C
SW upgrade
TFTP, X-modem (3 banks for various versions)
HUB MODE TDM/TDMA
Network size
Up to 252 terminals per each return channel (Inroute)
up to 31 Inroutes per Network
Topologies
Point-to-point, Point-to-multipoint, Half Mesh, Full Mesh
ENVIRONMENT (IDU)
Supply voltage
~ 100-240 VAC or 24 VDC
Power consumption, W
11, up to 80W with RF (Outdoor) equipment
Temperature range
0…+40
0
C
Maximum humidity
Up to 90% @ 25
0
С
Overall dimensions, mm
145 х 30 х 155 (router); 165 х 75 х 45 (power supply unit)
Brutto weight, kg, max
0,53 (router); 0,85 (power supply unit)
Table 2 Measurement results for receive base levels
FEC
C/N+N (Sp. An.)
C/N
Eb/No (data)
QPSK BER
1/2
5.0
3.4
3.7
9.0E-2
2/3
6.1
4.9
4.0
5.4E-2
3/4
7.0
6.0
4.6
3.5E-2
5/6
7.8
7.0
5.1
2.1E-2
7/8
8.5
7.8
5.8
1.3E-2
1.1.3 Router composition
UHP-1000 router consists of:
1. High-speed SCPC/MCPC demodulator
2. Burst demodulator
3. Universal modulator
4. Router
5. Controller
6. PSU - Power supply
PSU is an external device and provides a satellite router with power of 24VDC. UHP-1000
satellite router can be powered from any external DC power circuit with 24VDC and
sufficient current.
1.1.4 Principles of operation
UHP-1000 Satellite Router is an in-door part of Satellite Earth Station. The outdoor part of
the Earth station consists of:
 Satellite antenna;
 Block Up-Converter (BUC);
 Low-noise converter (LNB);