Specifications

EASTAR UHP-1000 SERIES SATELLITE ROUTER

INSTALLATION AND OPERATION MANUAL, V. 2.3

(SW VERSION 2.2.9)

traffic-generator off - Disable traffic generator

Switches traffic generator off.

Traffic generator sends same PING requests to the relevant address. In difference to PING

the generator operates in the background mode and does not interfere with entering the

commands, features no statistics and is intended for diagnostics with reference to counters

on interfaces.

2.11.12 Powering off

To power the router off the Power Supply should be disconnected from AC power. If the device

is powered by a low-voltage DC source, it can be powered off by disconnecting the DC cord

from DC IN connector of the router.

2.11.13 Safety instructions for operations

 Connect and disconnect any cables only when router is powers off;

 Do not block ventilation holes of the router, as this could lead to overheating

of the device;

 Clean the router by dry cloth, do not use liquid wipes or cleaners;

 Router must be installed on a stable and flat surface;

 Do not install on the router or near any glasses, vases and other containers

containing liquid;

 Do not try to repair the router and not use it for other purposes;

 There no serviceable components inside, opening a case is not permitted;

 Servicing by qualified personnel only;

2.11.14 Actions in case of fire

In case of fire or any smoke of the router please immediately power off the device and if

necessary, use extinguishing tools that are intended for electrical circuits.