Specifications

EASTAR UHP-1000 SERIES SATELLITE ROUTER
INSTALLATION AND OPERATION MANUAL, V. 2.3
(SW VERSION 2.2.9)
© ROMANTIS 2010 48 www.romantis.com
UHP#sh sn
Read community - public Illegal IP address - 0
Wrt. community - private Wrong rd.community - 0
IP permitted 1 - 0.0.0.0 Wrong wr.community - 0
IP permitted 2 - 0.0.0.0 No variable in MIB - 0
Input requests - 0 Table out of index – 0
The first row contains SNMP settings and the number of requests received by the router.
Illegal IP address - Number of requests from non-permitted IP-addresses.
Wrong community - Number of requests with a wrong password (community).
No variable in MIB - Non-existing variable is requested.
Table out of index - Table value beyond the Table scope is requested.
2.11.9 Additional commands
watchdog reset|interrupt - Watchdog timer overflow action
Debugging service command.
reboot - Restart device
Router reboot. If configuration has been changed but not saved, all the changes will be lost.
time shift -24-24 - Local time zone
Difference in time zone with Hub.
2.11.10 Controlling router status
Enter router’s IP address into Internet browser to access to connect to a monitoring and
control page of the router (see Figure 14). Switch to the ―Status‖ page for actual status of
the router and its interfaces. The page will be automatically updated every 5 seconds.
―Refresh‖ link allows manually updating the page on request.
Alternatively, the current status of the router can be accessed through a console with the
following commands:
show interface ethernet|tdma|demodulator|modulator - Interface stats
Displays settings and statistics of respective interface
show log - Display logs
Displays a log of events (from latest to newest)
2.11.11 Traffic diagnostics
---------- Diagnostics
ping IP_ADDR [1-1000000] [36-1470] [1-10000] - IP Number Size Interval(ms)
Sending PING request. The router can send up to 1000 packets per second.
Packet size (In contrast to WIN, LINUX) should be specified together with IP and ICMP protocol headers.
Example of PING command:
EASTAR # ping 10.0.0.1
SRC: 10.0.0.13 -> DST: 10.0.0.1 VLAN: 0
5 packets of 40 (12+8+20) bytes every 1000 ms (320 bps)
----------------------------------------------
Reply 1 TTL: 30 VLAN: 0 RTT: 4
Reply 2 TTL: 30 VLAN: 0 RTT: 1
Reply 3 TTL: 30 VLAN: 0 RTT: 1
Reply 4 TTL: 30 VLAN: 0 RTT: 1
Reply 5 TTL: 30 VLAN: 0 RTT: 1
----------------------------------------------
5 packets transmitted; 0 packets lost (0%) RTT (ms) min/average/max: 1 / 1 / 4
traffic-generator IP_ADDR 1-10000 36-1470 - IP packets/second packet_length
Switches traffic generator on. Apart from IP-address you have to set the number of packets per second and the
size of packets.