Specifications

The gas hose has an attached 37mbar pressure regulator (inlet W21.8x1/14” DIN 2 R5
steel nut KLF which ts gas cylinder outlet 1/4” acc. to H4 in EN16129). If your gas cylinder
has a di󰀨erent inlet size or requires a di󰀨erent regulator (check the table below), replace
the included regulator with the required one (available separately at your local market).
Destination country
Inlet pressure
(reducer)
Applianc e category / Reference gas
(Gas types on which device works)
BE, CY, CZ, DK, EE, ES, FR, GB, GR, HU,
IE, IT, LT, NL, NO, PT, RO, SE, SI, SK, TR
30 mbar (min.)
I3B/P / G30
PL
37 mbar
AT, CH, DE, FR, SK
50 mbar (max.)
FI, NL, RO
30 mbar (min.)
I3P / G30
BE, CH, CY, CZ, ES, FR ,GB, GR, IE, IT, LT,
HR, NL, PL, SI, SK
37 mbar
AT, CH, DE
50 mbar (max.)
BE, CY, CZ, DK, EE, ES, FR, GB, GR, HU,
IE, IT,LT, NL, NO, PT, RO , SE, SI, SK
30 mbar (min.)
I3+ / G30, G31
BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT,
HR, NL, PL, PT, SI, SK
37 mbar (max.)

Summary of content (1 pages)