Owner Manual

9
3.4. Gas cylinder montage
The gas linkage attached to the device allows to place the gas bottle maximally 1 meter (40”) away from the connected
control panel during it replacement. During operation the gas cylinder is hidden inside the device behind easily
removable doors.
Fig 6– Gas cylinder installation
Before proceeding with the connection of the gas cylinder to the fireplace all activity regarding the correct placement
and installation of the FARO needs to be already performed. Place the gas linkage away from hot or sharp edges and
make sure it is not twisted.
The FARO is delivered together with an elastic gas linkage which, on one end is connected to the valve of the device
and one the other end to the 11 WC regulator (in the twist-on version) ready to be connected to the gas cylinder. One
needs to control the expiry date both of the regulator as well as the gas linkage and if necessary (for instance: broken,
cut, scratched linkage) replace the components for new ones according to national standards and norms.
The FARO fireplace can use metal or steel bottles or composite bottles filled with propane-butane gas or propane gas.
This device features a twist-on regulator with current pressure of 11 WC.
WARNING
Before gas cylinder replacement, please block the wheels of the device.
WARNING
The montage and service needs to be conducted by a qualified professional, a company or the gas supplier.
WARNING
NEVER use an unstable gas connection (without a regulator).