Owner Manual

5
 For use outdoors or in amply ventilated areas only. The use of this appliance in enclosed areas is DANGEROUS and
is PROHIBITED.
 An amply ventilated area must have a minimum of 25 % of the surface area open. The surface area is the sum of
the walls surface.
Fig 1 – Minimum ventilation area
 Do not move the appliance when in operation.
 Shut off the valve at the gas cylinder or the regulator before moving the appliance.
 In case of violent wind precautions must be taken against tilting of the appliance.
 This appliance must be used, and the gas cylinder stored, in accordance with the regulations in force.
 The FARO fireplace should installed and controlled annually according to the below installation manual as well as
enforced national and local laws regarding gas safety (installation and use).
 One needs to assess whether the data one the product plaque complies with the local type of gas and pressure.
 Do not change the structure of the device or its sealed elements nor modify the default settings of the FARO
fireplace.
 Do not set any additional imitation blocks nor any glowing coal fragments on the burner or in the combustion
chamber.
 A CO2 or a powder fire extinguisher needs to be placed near the device.
 During the first ignition the FARO fireplace needs to be burnt on maximum level for a few hours in order for the
elements to acquire correct temperature and for the remains of paint, lacquer and lubricant to evaporate.
 Do not move the device while it’s working.
 FARO has been designed for decorative purposes. The surface of the FARO fireplace including the glass screens may
get hot (up to 100 degrees Celsius / 212 degrees Fahrenheit) with the exception of the side walls of the appliance
and the control panel.
 Glass panels must be installed when FARO is in use.
 This appliance must be kept away from flammable materials during use. Do not place any combustible materials
within a distance of 0,3 m (12”) of FARO and 1 m (40”) over the appliance (Fig 2).