Owner Manual

6
Fig 2 – Minimum distances
• When the fireplace is on it’s not to be exposed to rain.
• When not being used is to be protected from atmospheric conditions and the main valve of the gas cylinder
needs to be turned off.
• If is not in use for a longer period of time (e.g. winter time), we advise you to store it inside.
• All parts of the fireplace are made of stain resistant material.
• Never leave a turned on without supervision.
• The fireplace needs to be installed in a place inaccessible for children, unauthorised persons or animals for the
direct contact with the flame or hot parts of the device to be impossible.
• In case of heavy wind the fireplace needs to be immediately turned off and one needs to await until the heavy
wind passes.
• In case of noticing any sort of gas leaks the fireplace as well as the main valve of the gas cylinder need to be turned
off.
• After use turn off the gas cylinder valve.
• Use only the type of gas and pressure specified by the manufacturer.
• Change the gas cylinder in a amply ventilated area, away from any ignition source (candle, cigarettes, other flame
producing appliances).
• Do not obstruct the ventilation holes of the cylinder housing.
• In the event of gas leakage, the appliance shall not be used or if alight, the gas supply shall be shut off and the
appliance shall be investigated and rectified before it is used again.
• The gas cylinders should always be placed in a vertical position – during use and transport.
• Always store the gas cylinder in an easily accessible place to allow its immediate turn-off.
• During the installation process do not allow an open flame or any ignited object to reach the gas cylinder.
• Leaks should be found with the use of a cleaning liquid and water. If bubbles form on the surface that means that
a there’s an existing leak.
1m [40"]
300mm
[12"]
300mm
[12"]