Owner Manual

4. OPERATION INSTRUCTIONS

The fireplace has a control valve with a built-in ignition for the main burner (without pilot flame). The flame

height of the main burner may be appropriately regulated with by turning the knob. Next to the knob is placed electric

ignition button (powered by AAA battery). The control panel is placed in front just above the door of the gas cylinder

compartment (fig 7).

Fig 7– Control panel

4.1 Start-up of the device

• Make sure that the knob is placed in „OFF” position (all the way clockwise) (Fig 8).

Fig 8 – Off position

• Open the valve on gas cylinder.

• Press the knob and while still pressing turn it counter-clockwise from position (1) to position (2)

Fig 9 – Turning on the device

• While keeping the knob still pressed start the flame by pressing the ignition button (3).

Fig 10 – Pressing the on button