Specifications

166119 8/31/2006

4.7.4.9 Reset to Null Configuration

Selecting this option causes the current active local configuration to the reset to a “null”

configuration. The following image of the configuration status display (Figure 25) indicates the

state of the local system in a null configuration:

~ Nx8 ID: xxxxx Sys:3.2 FPGA:3.2 Ser:0 00007:34:32

~- CpA=o CpB=o Channels: X X X X X X X X X X X X X X X X LPwr=+x RPwr=..

-----------------------------------------------------------------------------

LOCAL NEAR FAR TX RX

CHANNEL STATUS SPEED ATTRIBUTES LOOPS LOOPS DATA DATA

Comp A Off 64 Kbps 62.4K unused, HI-Z None None n/a n/a

Comp B Off 64 Kbps 62.4K unused, HI-Z None None n/a n/a

CH 1 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 2 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 3 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 4 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 5 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 6 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 7 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 8 Alloc-A 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 9 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 10 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 11 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 12 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 13 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 14 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 15 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

CH 16 Alloc-B 4800 bps RS-232, Async, 10-bit None None ---- ----

<ESC> to exit, <Enter> to refresh: [FLASH NOT UPDATED]

Figure 25