EN Installer and User guide Easee Equalizer
Introduction The information in this leaflet applies to Easee Equalizer P1 (E02-EQP) and Easee Equalizer HAN (E02-EQ), unless specified otherwise. Read the Important product information guide in the product packaging or at easee.com/manuals before using the product. Optimal performance The Equalizer makes it possible to charge smarter, safer and faster if the installation is scaled accordingly.
Product overview Magnetic backside Touch button LED Equalizer x1 x1 Wall mounting kit For non-metallic surfaces Cable 3
Technical specifications General Dimensions Product 110 x 110 x 27.5 mm (H x W x D) Dimensions Product Packaging 130 x 130 x 39 mm (H x W x D) Permitted temperature -20 °C to +50 °C Weight 95 g (Equalizer P1) 110 g (Equalizer HAN) IP degree IP40 Supply 5-30 V DC 100 mA (Equalizer P1) 20-32 V DC 30 mA (Equalizer HAN) Cabling Cable length 1.
Max transmitted power Radio 25 mW at 863–870 MHz. WiFi 50 mW at 2.4–2.472 GHz. Connectivity Easee Link RFTM and WiFi1 HAN (NVE/AMS) (Equalizer HAN) or P1 (Equalizer P1) smart meter communication Modbus connection to energy meter2 Monitor power consumption with the Easee App RFID / NFC reader 1 WiFi is required for normal operation and for future software updates. Installations with multiple master chargers need to be connected to the same WiFi for load balancing to work.
Installation Customer setup Follow these steps if you are a private customer installing the Equalizer in your own household. 1 Activation 2 Download 3 Setup In Scandinavia, the communication port on the smart meter is most likely not activated. Contact your utility company to open the HAN port for use with the Equalizer. If you are not in Scandinavia, skip to step 2. Scan the QR code to download the Easee App and create a free account.
Installer setup Follow these steps if you are an installer and use the Installer App to configure the Equalizer in large commercial installations or private households. 1 Download 2 Setup 3 Connect Scan the QR code to download the Installer App and create a free account. Add the Equalizer to a new or existing charging site using the Installer App and follow the on-screen installation guide to set it up. Connect the Equalizer to the smart meter using the provided cable.
LED colours meaning 3'' Hold the Easee logo for 3 seconds to check connectivity.
Practical details Warranty The device is free from material defects and is in accordance with laws and regulations for consumer protection in the country where the product is purchased. All correctly installed Easee hardware is covered by our 3 years* limited warranty. *Some countries may have extended warranty. Returns and complaints Contact your distributor or Easee Customer Support at easee.support regarding the return and complaint of your product.
The information in this document is for information purposes only, is provided as is, and may be subject to change without notice. Easee AS including its subsidiaries does not accept any liability for the correctness or completeness of the information and illustrations, and is not liable or responsible for your considerations, assessments, decisions or absence of such, or other use of the information in this document.
