User Manual

MV-2505-02--2022

Auto Shut o with Water Tank Full Indicator

( )

The unit will enter into standby mode when the water tank is full or when the water tank

is not installed properly. After emptying the tank, or installing the water tank properly, the

unit will go on to the previous mode.

Except for the power button, all other buttons are invalid.

Memory Function:

A) Dehumidier and timer settings are retained:

When the power plug is disconnected and reconnected, or when the power returns

after a power cut.

B) The dehumidier setting is retained, but the timer setting is cancelled:

When the dehumidier is switched o and on with the on/o button.

C) Dehumidier and timer will return to factory settings:

When the dehumidier is switched o with the on/o button and the plug is pulled

out. And then switched on again.

6. Cleaning

When used regularly, the lter may become clogged with dust and particles. Therefore the

lter should be cleaned at least every two weeks. Follow these steps:

Switch the device o and remove the plug from the socket

before cleaning.

Clean the housing with soft, dry cloth. If the device is ex-

tremely dirty, use a mild cleaning agent. Wipe the dehumidi-

er with a slightly damp cloth. Never spray the device with

water.