User Manual

MV-2505-02--2022

3. Prior to Operation

• Place the dehumidier in an upright position on a stable, at surface.

• Ensure the dehumidier is at a safe distance at least 50 cm away from a wall or furni-

ture.

• Supply power should be in correspondence with the value on the nameplate, power

outlet needs to be grounded.

• Ensure the tank is correctly tted, if the tank is full or not in place, the tank full light

comes on and the dehumidier will stop working.

• Turn on the power and run the machine as per instructions below.

4. Continuous Drainage

In general, water will be collected by tank, if you want continuous drainage, please do

steps as follows (refer to gure 3)

a. Remove the water tank.

b. Mount a drainage hose (14mm inner diameter) to the drainage outlet.

c. Put the water tank back in place.

Please always make sure the hose is going downhill, and is not blocked or kinked.

≥20cm

≥50cm

≥20cm