User Guide

Battery Capacity 450mAh
Awaken Time ≤2 Seconds
5 hours continuous using time when the backlit is on
120 daysStand by Time
Working Distance 33 feet (10 meters)
Operating Current 80-115mA
3.0-4.2VOperating Voltage
Standby Current ≤1mA
Dimensions 9.98x7.79x0.5 inches
2~3 hoursCharging Time
55 hours continuous using time when the backlit is off
Specifications
06
2. Turn off the mouse key function
Go to iPad settings - Accessibility - Touch - Assistive touch - Mouse key
- turn it off.
Remarks: If the mouse key function is not turn off, it will cause the number
key‘7. 8. 9’and letter key ‘U. I. O. J. K. L. M’ can’t be entered.
09
( 1 ） ( 2 ）
( 3 )
( 5 )
( 4 )
Working Environment
Indicator Light
Charging
1. Please charge the keyboard with your iPad's charging cable.
2. Fully charge your keyboard, or charge it for more than 3 hours before you
use it for the first time.
The keyboard charging port is TYPE C, and the input voltage cannot exceed
DC-5V, otherwise the keyboard will be damaged.
1. Stay away from oil, chemical or other organic liquid articles. Note: liquid intake
can lead to a short circuit.
2. Stay away from 2.4G frequency items such as microwave ovens, routers and so
on. Note: it will interfere with Bluetooth.
3. Prevent sunlight exposure and high temperature.
05
Capital Indicator Light：
Press the keyboard Caps Lock, the indicator light is on.
Wireless Connect Indicator：
Press the "Fn+C" button, the indicator light will flash slowly and enter BT pairing
mode. When the pairing completion light goes out.
Charging lndicator Light：
Slow flashing red light means the battery is low, the charging status is red for a
long time, and it is green after charging is completed.
How to get the keyboard sync with iPad
1. Power on the keyboard by sliding the On/Off to On position.
Then press ‘fn’ and letter ‘c’ button together, the PAIR indicator will flash slowly,
the Bluetooth of the keyboard is opened.
2. Turn on the Bluetooth of your iPad.
3. Open the iPad Bluetooth Search when the Bluetooth pair lights twinkling.
4. Then there will be “Bluetooth 5.1 Keyboard
” comes up in the searching page,
select it, the Bluetooth will be connected.
If a problem persists, please try the following steps:
- Full charge the keyboard
- Update iPad to lastest version
- Delete all the Bluetooth devices on the iPad
- Reboot the iPad
- Switch the keyboard off and on
- Press ‘fn’ and letter ‘c’ together to open keyboard bluetooth
- Switch on Bluetooth on the iPad
- Reconnect the keyboard
The Bluetooth function will turn to sleep if you don't press the keyboard beyond 10
minutes, at this situation, you just need to press any key on the keyboard to wake
up the Bluetooth to get it work again. (Don't need to re-connect the Bluetooth)
04
+
Bluetooth 5.1 Keyboard
Function Key Description
: the f rst line
: turn on the B-tooth pairing mode
: Press once for on , twice for brighter , third for the
brightest and fourth to turn it off.
1. If no button is pressed within 1 minute, the backlight will go out automatically.
2. If no button is pressed within 10 minutes, the keyboard will be sleep to save
power mode.
3. The backlight function will be turned off automatically with low battery.
: adjust 7 backlit's color
Cyan
+
+
+
: the last page: the f rst page +
+
/
: the last line
+
03
i
i
Main screen
Search
Pre Track
Play/pause Next Track
Mute Volume -
Volume +
Lock screen
Brightness - Brightness +
Switch Language
=
=
=
=
=
=
=
=
=
=
=
=
Virtual Keyboard
=
English
Technical Support / Keyboard Features 02
CONTENTS
Function Key Description 03
How to get the keyboard sync with iPad 04
Indicator Light / Charging / Working
Environment
05
Installation / If you have unwanted
auto-correction or punctuation
07-08
Specifications 06
Pre-use Settings 08-09
Installation and Removal
If you have unwanted auto-correction or punctuation
1. Removing the back protective piece: hold iPad on both sides and use
thumbs to gently push off the back cover (see photo.) Cover is held
in place by two tabs.
2. Proceed to “peel” cover away from iPad.
3. Take iPad out.
4. Take iPad out upwards.
or
Find out an expired card
Insert the card into the gap and push the card to the cover side a little bit
Slid the card from one side to another
Separate the iPad from the cover easily
07
1 . Open Settings app > General Keyboard > Hardware Keyboard
2 . Toggle OFF Auto-capitalization , Auto-correction , and “ . ” shortcut
( please refer to the picture below )
Pre-use Settings
1. Turn on the lock / unlock function
After your iPad is connected the bluetooth with our keyboard , please go to iPad
settings - display and brightness - locking / unlocking function - turn it on.
Remarks: If the locking / unlocking function is not turned on, you can’t wake up the
bluetooth function nor wake up the iPad by pressing any key on the keyboard
after the iPad is in a dormant state.
08
( 1 ） ( 2 ）
Note: Please read the manual carefully before using
iPad Keyboard Case
USER GUIDE
360 °Rotate
180 °
180 °Flip
JP163K
Control Option Command Command
Alt
ShiftShift
Tab
Caps Lock Enter
Backspace
Del
If you have any issues or questions, let us know ASAP! We would love to get
you taken care of and happy right away! All units come with a full 12 month
warranty, so you can relax and takecomfort in your purchase.
For the fastest & friendliest support, contact us ( not Amazon ) via our email
address on the warranty card.
Technical Support
Keyboard Features
02
English
Shortcut keys need
to be used with “Fn”,
such as “page up”
“Fn+Pgup”