Owner's Manual

SAFETY INSTRUCTIONS
4 Specications are subject to change without notice
Supernova MKVI DSP Manual 21
WARRANTY INFORMATION CONT’D
This document contains general safety, installation, and operating instructions for
the MKVI DSP subwoofer. It is important to read this user’s manual before attempt-
ing to use this product. Pay particular attention to the safety instructions.
SAFETY FIRST
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions in their entirety.
2) Store this manual and packaging in a safe place.
3) Read all warnings.
4) Follow instructions (do not take shortcuts).
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatuses thatproduceheat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. The grounding-type
plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not t into your outlet, con-
sult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments and accessories specied by the manufacturer.
12) Use only a compatible rack or cart for the nal resting position.
• Burnt tracers on PCB
• Product/part damaged due to poor packaging or abusive shipping conditions
• Subsequent damage to other products
A warranty claim will not be valid if the warranty registration card is not properly
lled & returned to Earthquake with a copy of the sales invoice.
(E) Service Request:
To receive product(s) service, contact Earthquake Sound’s service department at
[phone] or [e-mail] and request an RMA (Return Material
Authorization)numberasitem(s)shippedwithoutavalid RMAnumberwillberefused.
Make sure you provide us with your complete and correct shipping address, a valid
daytime phone number, and a brief description of the problem you are experiencing
with theproduct. Inmostcases, our technicians might be able to resolvethe problem
over the phone or via e-mail, thus eliminating the need to ship the product.
(F) Shipping Instructions:
Product(s) must be packaged inside its original protective box(es) to minimize trans-
portation damage. Shipper claims regarding items damaged in transit must be pre-
sented to carrier. Earthquake Sound Corporation reserves the right to refuse
improperlypackaged product(s). Acopy oftheoriginalsales receiptmustaccompany
the product(s) returned for service. Ship the product(s) to:
Earthquake Sound Corporation. 2727 McCone Avenue. Hayward, CA 94545
The customer is responsible for the cost of shipping the product(s) to Earthquake
Sound Corporation
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting from
the one (1) year limited warranty policy must be resolved according to the laws &
regulations of the county of Alameda, California.
SYMBOLS EXPLAINED
NOTE:
Appears on the component to indicate the presence of uninsulated,
dangerous voltage inside the enclosure - that may be sufcient to
constitute a risk of shock.
Calls attention to a procedure, practice, condition or the like that, if not
correctly performed of adhered to, could result in injury or death.
Calls attention to a procedure, practice, condition or the like that, if not
correctly performed or adhered to, could result in damage to or de-
struction of part or all of the product.
Calls attention to information that is essential to highlight.