SDS

Safety Data Sheets (SDSs)
Report No.:ZKS180300284 Page 7 of 11
TRF No. SDS-1A
The voltage for a long time storage shall be 3.7V~4.2V range.
Do not storage Lithium-ion Battery haphazardly in a box or drawer where they may short-circuit each other
or be short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Li-ion Polymer Battery to heat or fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic materials.
Keep ignition sources away- Do not smoke.
Store in cool, dry and well-ventilated place.
Incompatible Products None known.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Control parameters
Ingredients with limit values that require monitoring at the workplace:
182442-95-1 Cobalt lithium manganese nickel oxide
TLV (USA)
0.02mg/m
3
MAK (Germany)
0.1mg/m
3
Other Exposure Guidelines Vacated limits revoked by the Court of Appeals decision in AFL-CIO v.
OSHA, 965 F.2d 962(11th Cir., 1992).
Appropriate engineering controls
Engineering Measures Showers
Eyewash stations
Ventilation systems
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible
exposure limits. Ensure adequate ventilation.
Individual protection measures, such as personal protective equipment
Eye/Face Protection:
Tightly sealed goggles
Body protection:
Protective work clothing.
Skin protection:
Protective gloves
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
Penetration time of glove material: