Use and Care Guide

Problem Possible Cause Possible Solution

− Unit does not run − Extension cord not connected to

the plug

− Check extension cord is fully connected to tool

− Cord not connected to power

source

− Check extension cord is fully connected to a live receptacle

− Trigger switch not fully operated − Check that safety lock of button is fully depressed prior to

moving trigger

− Chain brake is engaged − Pull hand guard back toward front handle

− Slow running, noisy or hot blades − Dry, corroded blades − Lubricate blades

− Blades or blade support bent − Straighten blade or blade support

− Bent or damaged teeth − Straighten teeth

− Loose blade bolts − Tighten blade bolts

— Bar and chain running hot and

smoking

− Check chain tension for

over-tight condition

− Adjust chain tension

− Chain oil tank empty − Fill tank with chain oil

− Chain installed in wrong

direction

− Reverse chain so that cutters face the right direction

— Motor runs but chain is not rotating

− Chain tension too tight − Adjust chain tension

− Check guide bar and chain for

damage

− Replace damaged bar and chain with identical replacement

parts.

STORAGE

TROUBLE SHOOTING

Store the tool in a dry, clean area out of reach of children.

During extended periods of storage, ensure that the tool is

protected against corrosion and rust.

At the end of the season, or if the tool is not being used for

longer than a month, wipe over all metal surfaces with an oil

impregnated cloth to protect them from corrosion or spray with

a fine coat of oil.

Model CVP41810