Full Product Manual
INSTRUCTIONS FOR USE
Turn the water on at the tap
When you are ready to re-wind the hose, gently tug
the hose away from the reel. You will feel the hose
start to retract back into the reel. Slowly walk back
towards the reel.
NOTE: Do not release hold of the hose as it is
retracng. The hose may ip up into the air as it is
pulled back up into the reel. This could cause
damage to the HOSE reel or to any surrounding
objects.
If the hose has goen dirty during use, you may re-
move the gate on the front of the hose reel and rinse
o the hose inside.
STEP 1
Take hold of the hose and slowly walk away from the
hose reel. The hose will unwind and the water will
ow through the hose
The automac locking ratchet will lock the hose in
place at your desired length. You may hear a ‘click as
the hose is locked in place.
STEP 2
STEP 3
When you are nished, turn the water o at the tap
and release any sing water in the hose using the
hose nozzle.
STEP 4
STEP 5
CLEAN-UP