Instruction Manual

2
1
8
4
5
6
7
9
10
11
14 23
24
27
28
29
14
3
17
18
19
20
7
18
21
17
16
3
22
3
12
13
16
25
6
6
26
13
15
7300SU Parts List
Key Part# Description Key Part# Description Key Part# Description
1 60273 AGITATOR & AXLE ASSEMBLY 11 32103 1/4-20 NYLON INS LOCKNUT ZINC 21 12261 END CAP HOPPER
2 13124 HOPPER ASSEMBLY 12 60237 WIRE & HOUSING ASSEMBLY 22 37103 #10-24 X 3/4" CARRIAGE BOLT ZINC
3 31141 #14 X 3/4" TYPE "AB" HWHS ZINC 13 37106 1/4-20 X 2" CARRIAGE BOLT ZINC 23 37100 1/4-20 X 1" CARRIAGE BOLT ZINC
4 25404 UPPER HANDLE 14 60027 WING NUT ASSEMBLY BLACK 24 12147 SPACER
5 37101 1/4-20 X 1 1/2" CARRIAGE BLT ZINC 15 25113 FRAME 25 12265 END CAP
6 31133 #8 X 3/4 PHPS TYPE A (BLACK) 16 12242 AXLE PLUG 26 70142 NUT PROTECTOR .234 ID. X .375 IL.
7 12319 UPPER HOUSING CLIP 17 12107 10" WHEEL 27 19114 .125" X .75" X 2" GRIP BLK
8 60178 GAUGE & HOUSING ASSEMBLY 18 12132 BEARING 28 37109 1/4-20 X 1 1/4" CARRIAGE BOLT ZINC
9 12140 FRICTION WASHER 19 12176 SHUT OFF 29 36208 #6 X 3/8" TYPE 25 PHPS S.S.
10 44259 LEVER 20 32108 10-24 HEX. NUT ZINC PLATED
Establishing a sEtting RatE
Step 1: Use Chart 1 to estimate the number of LBS/1,000 square feet of coverage (Example: 20LB bag with 10,000 square foot coverage = 2.0LBS/1,000
square feet)
Step 2: Find the closest LBS/1,000 square feet in Chart 2 that you estimated using Chart 1 (Example: 2.0LBS/1,000 square feet = Spreader Setting of 13)
CHART 2
GRAMS/SQ
METER
LBS./1,000
SQ FT
SPREADER
SETTING
5 Grams 1.0 LBS. 11
10 Grams 2.0 LBS. 13
15 Grams 3.0 LBS. 14
20 Grams 4.0 LBS. 16
25 Grams 5.0 LBS. 17
30 Grams 6.0 LBS. 18
35 Grams 7.0 LBS. 19
40 Grams 8.0 LBS. 20
45 Grams 9.0 LBS. 22
50 Grams 10.0 LBS. 23
CHART 1
BAG COVERAGE IN
SQUARE FEET
5,000 10,000 15,000
LBS/1,000 SQ FT
B
A
G
W
E
I
G
H
T
5 LBS. 1.0 0.5 0.3
10 LBS. 2.0 1.0 0.7
15 LBS. 3.0 1.5 1.0
18 LBS. 3.6 1.8 1.2
20 LBS. 4.0 2.0 1.3
25 LBS. 5.0 2.5 1.7
30 LBS. 6.0 3.0 2.0
35 LBS. 7.0 3.5 2.3
40 LBS. 8.0 4.0 2.7
45 LBS. 9.0 4.5 3.0
50 LBS. 10.0 5.0 3.3
GRASS SEED
GRAMS/SQ METER LBS/1,000 SQ FT SPREADER SETTING
10 Grams 2 LBS. 13
15 Grams 3 LBS. 14
20 Grams 4 LBS. 16
25 Grams 5 LBS. 17
The settings furnished on the Rate Setting Matrix
are intended as a guide only. Variations in physical
characteristics of material applied, walking speed,
and roughness of ground surface may require
slightly different spreader settings. Due to the
above conditions, EPI makes no warranty as to the
uniformity of coverage actually obtained from the
settings listed.
Drop Spreader Half Rate Path Drop Spreader Full Rate Path
EarthWay
21” / 53cm
Earthway Products, Inc.
P.O. Box 547
Bristol, IN 46507
Phone: [phone]
www.earthway.com