User`s manual

Getting Started
The PC Card Slot
The P aC c rd slot can be used as an interface between your computer and
ty f communications devices, such as network adapters, SCSI
a varie o
adapters, fax/modems, or provide additional data storage capacity. Your
compu r'
Zoomed V
Inst in
1. The t ard is
usua
Inser
t la
w
f
2. Insert the card into the slot. You
will feel some resistance as the
card sli
slot
te s PC card slot
supports PCMCIA Type II, 32-bit CardBus, and
ideo cards.
all g a Card
op side of a PC c
lly identified with a label.
t the card into the slot with
he bel side up and the edge
ith pinhole contacts going in
irst.
des into the back of the
.
3. PC ca that allows the operating
system are included with
Windo pted to install the driver
include
4. The co successful installation. A
single oblem recognizing the card.
rds require drivers, or a program
to use a specific device. Many drivers
ws, but if not, you will be prom
d with your card.
mputer will beep twice to indicate
beep means that there was a pr
Note: Please read the inst
individual PC
ructions included with
cards. Some cards may be inserted
with power on, while others require that the
computer be turned off.
Removi
1. If a card is in use, press the eject button on the card slot to release
the button.
2. Press again to release the card.
he card.
Slide the card into the slot.
Push the button to eject t
ng a Card
27