EQD Afterneath
4
<<< Controls >>>
7
16
12
6
15
11
5
10
1
19 20 21 22
2 3 4
8
17
13
9
18
14
Input: Adjusts the level of the incoming signal to allow for signals ranging from instrument-
level (clockwise) to modular-level (counterclockwise).
Dampen: Controls the tone of the wet signal. Clockwise for darker tones, counterclockwise
for brighter tones.
Reect: Controls the regeneration of the reverb, turn clockwise for more wash and echoes,
counterclockwise for less. This will self-oscillate if turned up high. Acts as an attenuator when
there is a signal patched into the Reect Return jack.
Mix: Controls the amount of wet signal that is mixed with the dry signal. Though it does not
actually go completely wet, you can achieve a fully wet signal by engaging the Dry Kill switch.
Dry Kill: Eliminates the dry signal from the output, leaving only the wet signal.
1
2
3
4
5