User Manual

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-514
Operator's Manual
CS4518B CHAINSAW
SPECIFICATIONS
SPECIFICATIONS
Displacement 45.02cc
Fuel mixture Mixture (Unleaded Gasoline, 50:1 two-cycle oil )
Fuel type Minimum 87 octane gasoline with NO ethanol content
NOTE: If using an ethanol blended fuel, a fuel stabilizer, mixed to
manufacturer specications, is recommended
Engine Oil Engines are lubricated by Viper Engine Oil Part No. 16890 specially
formulated for air-cooled 2-cycle gasoline engine use. If oil is not
available, use an antioxidant added quality oil expressly labeled for
air-cooled 2-cycle chain saw engine use.
Fuel tank capacity 550 ml
Chain oil Bar chain oil for proper season
Chain Oil tank capacity 260 ml
Carburetor Diaphragm type
Fuel consumption at maximum engine power 560 g/kw
.
h
Idling speed 3000 rpm max / rpm +/- 200
Maximum speed with cutting attachment 11,500 r/min +/- 500
Ignition system CDI with timing advance function
Spark Plug Champion RCJ7Y, NGK BPMR7A, or Torch L8RFT
Oil feeding system Mechanical plunger pump with adjuster
Sprocket Teeth x Pitch 7T x .375”
Dimensions (L x W x H) 425 x 240 x 288 mm
16.75” x 9.5” x 9.35”
Dry weight (without guide bar and chain, empty tanks 12.78 lb
Guide Bar Type Sprocket Nose
Guide Bar Size 18” Oregon® 180 SDEZ 095
Saw Chain Type Oregon® 91VG or 91P S62
Pitch 3/8” Low Prole
Gauge 0.050”
Model 2006/42/EC Operator Ear
L
PA
(dBA)
2006/42/EC Sound Power Level
L
WA
(dBA)
2006/42/EC Hand/Arm Vibration
Max m/s
2
CS3814B 100 110 10.5
CS4116B 100 110 10.5
CS4518B 102 110 12.5
Sound levels tested in accordance with ISO3744 & ISO 11201 - Grade 2 (Engineering ) Method. Readings taken with engine at full throttle.
EAV = Exposure Action Value, ELV = Exposure Limit Value
SOUND AND VIBRATION LEVELS
Specications are subject to change without notice.
This saw is intended primarily for the consumer or occasional user as dened in ANSI B175.1.