OPERATOR'S MANUAL POWER EARTH AUGER Model 8900E Model 9000E OM89 Rev. 6/9/05 © Copyright 2004 Ardisam, Inc. All Rights Reserved. Printed in USA.
ARDISAM REGISTRA TION AND W ARRANTY REGISTRATION WARRANTY THANK YOU . . . One Year Limited Warranty for purchasing an Earthquake Earth Auger from Ardisam, Inc. We guarantee that this auger conforms to applicable North American safety standards, and have worked to ensure that it meets high standards for usability and durability. With proper care, your auger will provide many years of service. Please take the time to read this manual carefully to learn how to correctly operate and maintain your auger.
ARDISAM SAFETY OWNER'S RESPONSIBILITY IMPORT ANT SAFETY PRECAUTIONS IMPORTANT Accurate assembly and safe and effective use of the auger is the owner's responsibility. Please read this section carefully. Operate the auger according to the safety instructions and recommendations outlined here and inserted throughout the text. Make sure anyone who uses the auger has read the instructions and is familiar with the controls. 1. Read and follow all safety instructions. 2.
ARDISAM OPERA TION OPERATION REGISTRATION FORM FUEL MIXTURE Complete and return. Your auger’s serial number is located on the powerhead decal under the Barracuda name. Record this number and the model number in the space provided on page 2 of this manual. You will need these numbers if you order parts. Fill out and mail the registration card located in your parts packet. Warranty is valid only if your completed registration card is received by Ardisam, Inc., at time of purchase.
ARDISAM MAINTENANCE AND ST ORAGE STORAGE CAUTION ENGINE MAINTENANCE CAUTION To prevent accidental starting: Engine must be turned off and cool, and spark plug wire must be removed from spark plug before checking and adjusting engine or equipment. Do not operate auger before reading the engine manual provided in the parts packet. CAUTION Temperature of muffler and nearby areas may exceed 150° F (65° C). Avoid these areas. CAUTION Check auger often for loose nuts and bolts. Keep these items tightened.
ARDISAM SERVICE TING AND REP AIR SERVICE,, TROUBLESHOO TROUBLESHOOTING REPAIR SERVICE INFORMATION ORDERING REP AIR PARTS REPAIR Parts can be obtained from the store where your auger was purchased or direct from the factory. To order from the factory, call or write to: IN CASE OF A SERVICE PROBLEM, DO NOT SEND UNIT BACK TO RETAILER. CONTACT ARDISAM, INC. AT 1-800-345-6007. Ardisam, Inc. 1690 Elm Street, Cumberland, WI 54829 Phone (715) 822-2415 Main Fax (715) 822-2223 1-800-345-6007 Email info@ardisam.
ARDISAM SERVICE TING AND REP AIR SERVICE,, TROUBLESHOO TROUBLESHOOTING REPAIR TROUBLESHOO TING TROUBLESHOOTING CAUTION Practice safety at all times. Engine must be turned off and allowed to cool, and spark plug wire must be disconnected before attempting any maintenance or repair. Problem Possible cause Remedy/Action Engine will not start 1. Power switch off 2. Spark plug wire disconnected 1. Flip switch to on position 2.
ARDISAM EARTHQUAKE MODEL 8900E PPARTS ARTS LIST Page 8
ARDISAM EARTHQUAKE MODEL 8900E PPARTS ARTS LIST MINIMUM ORDER ........................................................................... $10.
ARDISAM EARTHQUAKE MODEL 9000E PPARTS ARTS LIST Page 10
ARDISAM EARTHQUAKE MODEL 9000E PPARTS ARTS LIST MINIMUM ORDER ........................................................................... $10.
Ardisam, Inc. 1690 Elm Street, Cumberland, Wisconsin 54829 (715)822-2415 • Fax (715)822-4180 1-800-345-6007 www.ardisam.
