Owner manual

OPERATOR INSTRUCTIONS AND PARTS
CRT Models 5055C & 6065VEC
Page 19
GetEarthquake.com
800-345-6007
PROBLEM REMEDY/ACTION
 
  
- disconnect spark plug wire and secure from spark plug
- remove belt guard
- pull down on drive safety control levers
- manually bend forward belt guide so there is 1/16 inch
or less clearance between belt guide and belt
- replace belt guard and spark plug wire
 
  
- disconnect spark plug wire and secure from spark plug
- release drive safety control levers to neutral position
- remove belt guard
  
while drive safety control levers are released, bend
metal tabs on reverse belt guide to 1/64 inch or less
clearance from reverse belt
- replace belt guard and spark plug wire
Excessive heat build up in transmission/tine
area during tilling
 
Tine Axle Shaft of Normal Care section.
FOLLOW ALL SAFETY INSTRUCTIONS
