User guide

Operator's Manual
CRT Models 5040 and 6040E
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST
15
SERVICING THE ROTOTILLER
The following information will help you make the
necessary checks and perform the procedures required
to follow the normal care recommendations made for
your rototiller unit.
If you prefer, your local authorized dealer can make these
checks and perform the required procedures for you.
MAINTENANCE
MAINTENANCE SCHEDULE
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment
to provide you with years of reliable operation.
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
Maintenance Operation Page
Before
Each Use
50 hours or
Every Season
Change forward/reverse belt 16 X
Engine maintenance 17 X X
Check or ll engine crankcase with oil 17,EM X 2
Check tiller transmission grease 17 X
Check tire pressure 17 X
Lubrication 18 X
Clean tine axle shaft 18 X
Storage 18 X
Check throttle control adjustment EM 1
EM = See engine manual
1 Adjust throttle control after first 3 hours of operation or if engine is hard to start or run-on occurs.
2 Change oil after first 5-8 hours of use, then after every 50 hours or every season. Change oil every 25
hours when operating under heavy load or in high temperatures.
WARNING
TO PREVENT ACCIDENTAL STARTING:
ENGINE MUST BE TURNED OFF AND COOL,
AND SPARK PLUG WIRE MUST BE REMOVED
AND SECURED FROM SPARK PLUG BEFORE
CHECKING AND ADJUSTING ENGINE OR
EQUIPMENT.