User Manual

Digital Class “D”Amplifier
The ini e amplifierMMDSP
utilizes the advanced class
“D” circuitry with over 90%
efficiency, allowing it to
continuously perform
without getting hot.
The 600-Watt peak power
amplifier is fully equipped
with IR input, auto room
tuning adjustments, 0 - 180°
phase switch, low level RCA inputs & outputs, auto
signal sensing, iWoofer app controlled auto room
correction.
Premium Long Throw Drivers
The active driver installed in
every MiniMe isDSP P10/P12
specifically designed for
accurate reproduction of bass
and sub-bass frequencies.
Built with TCT (Turbine Cooled
Transducer) Technology,
stitched tensile leads, anti-
wobble cone construction and reinforced dust cap,
the MiniMe driver effortlesslyDSP P10/P12
produces phenomenal bass with extremely low
distortion while staying cool the entire time.
Mass Tuned SLAPS (Symetrically
LoadedAudio Passive System)
Earthquake’s own patented
SLAPS passive radiator
technology dramatically
increases the subwoofer’s
efficiency and capability for
ultra low frequency
reproduction. The unique
design of the SLAPS employs
dual (identical) suspensions,
allowing the passive driver to move the same amount
of air in either direction. Coupled with the active
driver, the SLAPS enables the sub to deliver louder
bass without using more power from the amplifier.
Luxurious Piano Gloss Cabinet
The deep luxurious black piano lacquer begins with a
thorough sanding and priming, followed by multiple
applications of black lacquer with additional fine
sanding between each layer, and finished with a
smooth, high gloss clear coat.
Introduction
What Makes a MiniMe?
Earthquake Sound Corp. | [phone] | www.earthquakesound.com6 MiniMe DSP P10/P12
The MiniMe DSP system is designed to dramatically
enhance your enjoyment of music and films at home by
adding power and impact to low frequency sound
effects without taking up your entire living space.
Congratulations and thank you for choosing the
Earthquake MiniMe subwoofer as a keyDSP P10/P12
component of your audiophile system.
The MiniMe subwoofer utilizes anDSP P10/P12
advanced digital class “D” amplifier, a premium long
throw driver and a mass tuned passive radiator with
patented SLAPS (Symmetrically Loaded Audio
Passive System) Technology. With a ported design and
piano gloss enclosure, the MiniMe DSP
P10/P12 subwoofer delivers phenomenal bass. The all
new iWoofer™ interface allows for automatic
professional room tuning for full control of the DSP from
a mobile device.
Designed in the USA, the MiniMe DSP P10/P12
subwoofer meets and exceeds all industry standards
of performance and quality. With uncompromised
“World Class” performance and superior technology,
the MiniMe subwoofer embodies bothDSP P10/P12
power and elegance.