Product Manual

1. Raises the bed section of the table up
2. Lowers the bed section of the table down
3. Raises the back rest of the table up
4. Lowers the back rest of the table down
5. Raises the leg section of the table up
6. Lowers the leg section of the table down
The follwoing instructions will guide you
through each function of your hand control.
RESET MODE:
Step 1
Press and hold the
two middle buttons
of the second row
simultaneously until
you hear a series of
beeps (Diagram A).
Keep buttons pressed
until beeping stops.
Step 2
Lower back rest
down to a at
position
(Diagram B).
Keep button pressed
until beeping stops.
Step 3
Lower leg section
down to a at
position
(Diagram C).
Keep button pressed
until beeping stops.
Table Up
1
Back Rest Up
3
Leg Section Up
5
Table Down
2
Back Rest Down
4
Leg Section Down
6
HAND CONTROL INSTRUCTIONS - ELLORA VISTA™ ELECTRIC SALON
Rev_1014_13_1100
Phone: [phone] Fax: [phone](760) 599-1112 www.earthlite.com
A
After the back rest section and leg section are reset and fully retracted to
their at positions (diagram below), the table will start working normally.
B C