Product Manual

SECTION 3 : INSTALLATION
Leveling Your Table
Leveling, or balancing, your table is very important during ini al setup and rou ne maintenance.
Your table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the posi on you plan to use it.
2. To determine which foot needs adjus ng, a empt to “rock” your table. If there is any
movement, the leg that is li ing is the one that will need adjus ng.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed direc on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
6
Your Apex table comes completely assembled and ready to use.
Once the table is unpacked, follow the “Moving Your Table” instruc ons below.
Moving Your Table
Li your table by grasping  rmly from the bo om of the frame underneath the
upholstered top. Do not try to li from the upholstered top.
Your table is very heavy - extreme cau on should be used to avoid injury
to yourself, others around you, and your table. DO NOT li or move
without using proper safety procedures/equipment.
Weight & Lift Capacities
The Apex Li recommended weight capacity is 400 pounds
400 lbs.
Electrical Speci cations (Apex Lift Only)
Input Voltage 120 VAC
Input Frequency 60 Hz
Consump on 2.5 Amps, 300 Wa s max
Output 32 VDC
Duty Cycle 10%, 2 min/18 min