Product Manual
11
TABLE RESET
Electric Salon Top & Tilt Top Tables
Lower Back Section
Lower Leg Section
(Salon Only)
Lower Entire Table
If your electric Ellora™ Vista table is not working properly, it may need to be reset. The following steps will
guide you through the reset process:
Step 1
Press and hold the two
middle buttons of the second
row simultaneously until you
hear a series of beeps.
(Diagram A)
Keep buttons pressed until
beeping stops.
After the back section and leg section are reset and fully retracted to their at positions (like
diagram below), the table will start working normally.
Step 2
Lower back rest down to
a at position.
(Diagram B)
Keep button pressed until
beeping stops.
Step 3
Lower leg section down to
a at position.
(Diagram C)
Keep button pressed until
beeping stops.