USER MANUAL Ellora Vista ™ Electric Lift Table Salon Tilt Flat 1-400-0027 • Rev D • 3/9/2021 © Earthlite 2021, All Rights Reserved
Legal Notice The information provided in this document is intended for informational purposes only and is subject to change without notice. The information provided in this document should not be construed as a commitment by Earthlite®. © Copyright 2021 Earthlite® All rights reserved. This document or any portion thereof may not be reproduced in any way, including photocopying or translation to another language without the prior written permission from Earthlite®.
INTRODUCTION Congratulations on your purchase! Earthlite’s Ellora Vista™ is perfect for day spas, medi-spas, and resorts. It features a whisper-quiet yet powerful electric lift actuator complete with ondemand height adjustments. This stunningly designed table provides exceptional comfort, function, and years of trouble-free use.
SAFETY INFORMATION Safety Symbols Indicates an imminently hazardous situation which could result in serious or fatal injury. Familiarize yourself with the following Safety & Warning symbols. They are designed to prevent damage and injury to you, your clients, and your new Earthlite product. Indicates a potentially hazardous situation which could result in serious injury.
SAFETY INFORMATION To reduce the risk of burns, fire, electric shock, or injury to persons: 1) Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. 2) Do not operate this equipment unless properly trained. 3) Install this furnishing in treatment area not accessible to the public. 4) Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
TABLE SPECIFICATIONS The Ellora Vista™ is constructed with state of the art materials beginning with a heavy-duty curved steel frame. The upholstered tops are available in three (3) separate variations, Salon, Tilt, and Flat. The Ellora Vista™ was designed with operational simplicity in mind. The height adjustment functionality is controlled by a single foot control. The Salon and Tilt variations of the table are equipped with pneumatic and manual back tilts and leg breaks.
TABLE REMOVAL FROM SHIPPING CRATE If you did not have your table shipped with ‘white glove’ service, you may be required to remove your table from its shipping crate. We highly recommend that at least two people conduct the following steps to uncrate the table. UNPACKING YOUR ELLORA VISTA™ STATIONARY TABLE The following steps will guide you through carefully removing your Ellora™ Vista Stationary table from the shipping crate. We recommend wearing work gloves during these steps.
LEVELING THE TABLE Not all commercial and residential floors are perfectly level. The Ellora™ has foot glide levelers that swivel into place against the floor. If your table is not already level when you remove it from the shipping crate, follow these easy steps to level your table: Step 1 Locate which foot glide leveler is not even with the floor. Step 2 Rotate the foot glide leveler clockwise or counter clockwise to bring it to ground level.
FOOT CONTROL OPERATION The Ellora Vista™ comes out of the shipping crate ready to go to work. The foot control is already connected, allowing you to simply raise and lower the table with your feet while your hands remain free to focus on your clients. The left foot pad is designed to lower the table and the right foot pad is designed to raise the table. The height adjustment range of the Ellora Vista™ is 18” at its lowest position and 36” at its highest.
PNEUMATIC BACK TILT OPERATION Salon Top & Tilt Top Tables Pneumatic Ellora Vista™ tables come equipped with a non-electric pneumatic assist mechanism. The following steps will guide you through operating the pneumatic back tilt control and adjusting the back to the desired level: Step 1 Locate the pneumatic back tilt handle, which is located on the right side under the back tilt. Step 2 The handle is set to the locking position.
PNEUMATIC LEG BREAK OPERATION Salon Top Table Ellora™ Vista Salon tables with the PowerAssist™ option come equipped with the same non-electric pneumatic assist mechanisms as mentioned above. The following steps will guide you through operating the pneumatic leg break control: Step 1 Locate the pneumatic leg break control, which is located under the front section of the table. Step 2 The handle is set to the locking position.
HAND CONTROL OPERATION Electric Salon Top & Tilt Top Tables Electric Ellora™ Vista tables come equipped with a convenient hand control for adjusting the back and leg section (if applicable), as well as the table height..
TABLE RESET Electric Salon Top & Tilt Top Tables If your electric Ellora™ Vista table is not working properly, it may need to be reset. The following steps will guide you through the reset process: Step 1 Press and hold the two middle buttons of the second row simultaneously until you hear a series of beeps. (Diagram A) Step 2 Lower back rest down to a flat position. (Diagram B) Step 3 Lower leg section down to a flat position. (Diagram C) Keep buttons pressed until beeping stops.
WEIGHT & LIFT CAPACITIES 650 lbs. The Ellora Vista™ is powered by a heavy-duty, whisper quiet lift actuator to enable easy height adjustment, and positioning. The recommended lift capacity for the Ellora Vista™ massage table is 500 lbs. 50 lbs. The back rest section of the table, whether pneumatic or electric has a maximum weight capacity of 50 lbs. 50 lbs MAX REPLACING A FOOT GLIDE LEVELER If a foot glide leveler becomes damaged or is need of replacement, carefully follow these next steps.
PLUG DESCRIPTIONS & ELECTRICAL SPECIFICATIONS China PLUG DESCRIPTION NORTH AMERICA UK / MIDDLE EAST 120V AC ASIA EUROPE 220V AC 220V AC 220V AC Spec AT North America Europe/Asia Service 120 VAC/60Hz 220 VAC/50Hz Max Amperage 2.3 Amps 1.
TROUBLESHOOTING Helpful Tips This helpful troubleshooting guide will provide you with information about how to recognize a problem with your Ellora Vista™, determine possible causes, and find a solution. In the event your specific situation is not covered in this guide, please contact Earthlite so our technical support department can assist you. Earthlite Customer Service (760) 599-1112, or (800) 872-0560 Probable Cause Problem Solution My table is wobbling and moving from side to side.
LIMITED LIFETIME WARRANTY Absolute Satisfaction Return Policy If you are not completely satisfied with your Earthlite portable table, chair, or accessory, you may return it within thirty (30) days for a full refund (excluding shipping & handling charges on the original order). Standard stationary and lift tables may be returned within thirty (30) days for a refund (excluding shipping & handling charges on the original order) less a 20% restocking fee.
OWNER’S RECORD Name: Purchase Date: Model No: Serial No:
NOTES
Contact Us Hours of operation: Earthlite 990 Joshua Way Vista, CA. 92081 (800) 872-0560 (760) 599-1112 Int’l (866) 599-7374 fax info@earthlite.com Monday - Friday 8:00 a.m. to 5 p.m. PST Saturday - Sunday Closed Visit us online at: earthlite.
