Product Manual

SECTION 4: OPERATING INSTRUCTIONS

Height Adjustment

Note: You will need to either turn your table on its side or have a second person to hold

the table in a  lted posi on while you adjust the legs.

Step 1: Locate the adjustment knobs and turn counterclockwise to loosen.

Step 2: Remove knobs to expose the screws.

Step 3: Remove the outer part of the leg.

Step 4: Move outer part of the leg up or down to adjust table height. When leg is at the

desired posi on, replace knobs and  ghten securely by turning clockwise.

Lever location for

head tilt section

(underneath table top)

Pneumatic Tilt/Salon Adjustment (Optional)

One-Touch Lever

Lever location for

leg/foot tilt section

(underneath table top)

To adjust, compress the lever to release, allowing you to reposi on the angle of the table

sec on. Using your other hand, support the table sec on un l the desired angle is reached,

and release the lever to lock into place.

Note: Adjustments can be done with a client on the table, however, use cau on to ensure

that the client’s weight is supported with your hand that is guiding the table sec on.

Step 1 Step 2

Step 3