Product Manual

Your Sedona table comes completely assembled and ready to use.
Once the table is unpacked, follow the “Moving Your Table” instruc ons below.
Moving Your Table
Li your table by grasping  rmly from the bo om of the frame underneath the
upholstered top. Do not try to li from the upholstered top.
Always use cau on when moving your table - always use proper safety
procedures/equipment.
Leveling Your Table
Leveling, or balancing, your table is very important during ini al setup and rou ne maintenance.
Your table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the posi on you plan to use it.
2. To determine which foot needs adjus ng, a empt to “rock” your table. If there is any
movement, the leg that is li ing is the one that will need adjus ng.
3. Raise table height approximately 6 inches.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed direc on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
Table Accessories
All Sedona tables come with outlets at both ends, speci cally designed for providing a  xed
loca on for FacePillow pla orms, salon pillows, and other accessories.
See the Earthlite website for all available accessories that
will  t into the table outlets.
SECTION 3: INSTALLATION
6
Weight & Lift Capacities
The Sedona maximum weight capacity is 800 lbs.
800 lbs.
The back sec on and leg sec on has a maximum weight capacity
of 50 lbs. These sec ons are not meant to hold full body weight.
50 lbs.