Product Manual

SECTION 4 : OPERATING INSTRUCTIONS
6
Weight & Lift Capacities
The Everest is powered by a heavy-duty 3-stage li column. The
recommended li capacity for all Everest tables is 600 lbs.
600 lbs.
The (oponal) back and leg secon has a maximum weight
capacity of 50 lbs. These secons are not meant to hold full body
weight.
50 lbs.
Always use extreme cauon when making any posion adjustments to
your table. Ensure all body parts and objects are clear from all moving parts.
The described adjustments can be done with a client on the table, but use
cauon to ensure that the client’s weight is supported while posioning the
table secon(s).
Do not sit or put unnecessary amounts of pressure
on the back secon of the table when it is in lt
posion of any level. This can damage or destroy the
lt mechanism and cause harm or bodily injury to
persons. The lt mechanism is intended solely to be
used when a client is properly seated or laying on the
table top. Damage caused in this manner may void
the warranty.
Do not sit or put unnecessary amounts of pressure
on the leg secon of the table when it is in lt
posion of any level. This can damage or destroy the
lt mechanism and cause harm or bodily injury to
persons. The lt mechanism is intended solely to be
used when a client is properly seated or laying on the
table top. Damage caused in this manner may void
the warranty.
Important Safety Notes
DO NOT store or place anything under the backrest - this can damage the
top and/or lng mechanism and will void your warranty. This area is not
designed for storage or as an area to hold accessories and/or massage
supplies while performing any type of service.
DO NOT store or place anything between the table and the base - this can damage
the table and/or base and will void your warranty. The base of the table is not
designed for storage or as an area to hold accessories, including foot pedal.