Product Manual

SECTION 4: OPERATING INSTRUCTIONS
9
Pneumatic Back Tilt (Optional on Selected Models)
Step 1
Locate the pneumatic back tilt
handle, which is located on the
right side under the back tilt.
Step 2
The handle is set to the locking
position.
Step 3
Squeeze / press the handle to re-
lease the pneumatic assist, which
allows you to move the back tilt
up or down.
Step 4
With the handle squeezed /
pressed, move the back tilt to the
desired level and release the han-
dle. It will lock in place.
Step 1
Locate the pneumatic leg break
control, which is located under the
front section of the table.
Step 2
The handle is set to the locking
position.
Step 3
Squeeze/press the handle to re-
lease the pneumatic assist, which
allows you to move the back tilt
up or down.
Step 4
With the handle squeezed/pressed,
move the back tilt to the desired
level and release the handle. It will
lock in place.
Pneumatic Leg Section (Optional on Selected Models)
Note: the above images are for instructional purposes only - your table/base style may