User's Manual

GPR4 Utility Scanner
–
User Manual
D
-
000002
-
000023
Earth Science Systems, LLC
October
9
,
2019
Copyright © 2019 ESS, LLC. All rights reserved. Page 9 of 27
2. Unscrew the securing fastener on the retainer cross bar and pivot the cross bar out of
the way. Remove the scanner and the tablet from the shipping case. Remove one of
the batteries from the charger in the shipping case and insert into the scanner.
3. Remove the handle from the shipping case and attach it to the scanner. Adjust the
angle of the extension tube as desired.
4. Remove the tablet computer and the tablet holder from the protective pouch. Mount the
tablet holder to the handle and then attach the tablet to the holder.
Figure 3. Assembled Utility Scanner.